Key Specifications
Product Overview
The evaporator coil in your air handler will always create condensation during normal operation, so having a safety precaution that monitors the water level is crucial for safe, sustained performance. The CoolGuard FS2 Float Switch monitors moisture levels to watch for clogs. If the condensate drain in your HVAC system becomes clogged, the CoolGuard Float Switch is the piece responsible for shutting the system down before the moisture can back up and damage the delicate internal hardware. With a construction designed to be installed horizontally where the primary drain pan meets the auxiliary drain outlet, the CoolGuard FS2 Switch comes with the necessary adapter, bushing, and cap to streamline setup. Supporting 24VAC of voltage and 1.25 amps of current, the CoolGuard Switch is approved for use in class 2 thermostat circuits. The easy-to-remove cap guarantees a quick and easy process to inspect the status and levels in the float switch. What more could you be looking for out of a float switch? Opt for the CoolGuard FS2 Float Switch today.
Additional specifications
| UPC | 840433704249 |
|---|---|
| Series | CoolGuard |
Technical Specifications
Performance
| System Type | Cooling Accessories |
|---|
Electrical & Fuel
| Voltage | 24V |
|---|
Physical & Certifications
| Dimensions (W x H x D) | 1.5 x 8 x 5.75 |
|---|---|
| Weight | 1 lb |
| Color / Finish | White |
Shipping & Delivery
Manufacturer Warranty
Covered by MRCOOL's limited warranty. Warranty terms are set by MRCOOL and differ by product line — whether registration is required, and whether the installation has to be performed by a state-licensed HVAC contractor, is not the same across the range. In every case coverage depends on the unit being installed according to MRCOOL's instructions and all applicable codes and permits. MRCOOL's warranty document for this model is the controlling source; ask us and we'll send you the one that applies.
Professional Installation Recommended
Most HVAC equipment must be installed and connected by a licensed professional to remain safe, code-compliant, and eligible for manufacturer warranty coverage. If you're unsure about installation requirements, contact us before you order.
You May Also Like
Make sure it is the right size, and that you have the rest of it
Most outdoor units ship alone. If you are not certain of the capacity, or of what has to go with this unit, these two will work it out with you.
Still deciding on the right equipment?
Our HVAC specialists can help you confirm sizing and compatibility before you buy.